Understand the maintenance and maintenance of folding mask machine
The
maintenance and overhaul of the folding mask machine is very important.
The maintenance of the mask machine can bring more safety and
efficiency to the mask machine. Therefore, how should we do it during
the maintenance of the mask machine? During the process, if the mask
machine is not maintained, then the precision of the mask machine will
decrease, and it will increase the maintenance probability of the mask
machine. Usually, the maintenance of the mask machine is differentiated
in several aspects: pneumatic system, ultrasonic system, transmission
system, electrical system, appearance It is necessary to maintain the
power and shut down during maintenance.
First, pneumatic system:
The air filter cup of the mask device needs to check whether there is
water discharge or the way to put water into the air compressor. In the
area with high humidity, the air compressor should be drained every day
to see if there are any air leakage phenomenon in the trachea cylinder.
Orientation and normal operation.
Second, the ultrasound system
Check whether the ultrasonic mask system is kept clean, especially the
ultrasonic box, vibrator (transducer), welding head must be boring to
clean and can not have water, the connection line is necessary to go to
the firm and often to see the ultrasonic welding head wear Observe the
degree of change in the voltmeter and ammeter pointer on the ultrasonic
box.
Third, the transmission system
The transmission system includes components such as motors, gears,
speed reducers, sprockets, chains, conveyors, etc. We must inspect the
motor for dust and other objects that affect the heat dissipation. Were
the gears and sprockets oiled, and if there are attachments, they should
be Clean, the chain tension is not suitable for whether there is no
foreign matter is not cleaned, the connection screws between the
transmission parts are not loose phenomenon, the reducer's oil is not
enough, usually 1000-1500 hours the machine needs to replace a lubricant
.
Fourth, the electrical system
Check whether the connector of the mask machine equipment circuit is
loose, whether the main power line, branch signal line, etc. are worn
and aging phenomenon. Will the electrical equipment be loosened? Does
the electrical box maintain a dry environment and the exhaust fan is not
normal? Work, etc.
Fifth, appearance
Masks are used to wear on the face, and medical masks need to enter
the operating room, so the production of masks requires the neat
cleaning of the mask machine equipment, every day after work needs to
arrange personnel to shut down after power off the mask machine
equipment The operating table and the mask containing the mask are
cleaned. Note that it is not possible to use water for cleaning. Use
non-toxic and volatile cleaning fluids such as alcohol to clean the
equipment.
Sixth, other
Equipment can not stick to easily corroded liquids and objects. Sweat
can easily cause rust on the equipment parts. If the equipment does not
work for a long time, you need to apply anti-rust oil to the
transmission system of the mask and the parts that are prone to rust.
The above is the knowledge of the maintenance of the equipment
provided by the manufacturers of folding masks. As long as the
maintenance and maintenance of mask equipments are done every day, it
will greatly increase the lifespan of masking machines and reduce the
probability of maintenance to bring greater benefits. Must insist on
cleaning every day in order to ensure that the masks produced are all
healthy and non-polluting masks. Maintenance does not take too much
time. Daily maintenance can make equipments and other equipments to
serve you and your company for a long time. Production of masks, hope
this knowledge is helpful to everyone Thank you for watching.
2020-03-23